How to Fix the 'Operating System Not Found' Error (2024)

> Windows

If your computer can’t find an operating system to boot into, you might see a very simple error against a black screen that reads “Operating System not found”. This might be a startling error to see, but there's no reason to worry—your files are probably not gone.

Causes of the 'Operating System Not Found' Error

There are some simple reasons this could happen, and it’s unlikely that your important data has been erased. Here are some causes for this error:

• A non-bootable device is trying to boot up
• BIOS has been misconfigured
• Boot records are damaged
• The hard drive is damaged or unreachable

How to Fix the 'Operating System Not Found' Error

Follow these steps in the order they're listed to try the simpler solutions first:

1. Restart your computer. The error could be a temporary glitch that a restart will fix. If you don't see a normal restart option, use the Ctrl+Alt+Delmethod.
   

2. Disconnect unnecessary flash drives, eject the disc if there's one in the disc drive, and remove any floppy disks. Your computer might be trying to find a suitable OS on one of those devices, and if it can't, it might display the “Operating System not found” error.

3. Boot into BIOS and make sure the hard drive the operating system is installed on is listed as the first boot device. If it's not, change the boot order so that it is.

   

   This is important because if something else like a flash drive or disc has priority but doesn’t have an operating system on it, your computer will assume that there isn’t an OS to boot to, and it will throw the "not found" error.

4. Toggle UEFI Secure Boot on or off, depending on what it's set at right now. Whether Windows can boot in UEFI mode depends on whether it's on a GUID Partition Table disk or an MBR disk. Enabling or disabling Secure Boot can determine if the error is related.

   You do this through the BIOS setup utility (see the link in Step 3 to learn how to get there) through the Security tab. Toggle Secure Boot to whatever it currently isn't, so either Enabled or Disabled.

   Restart your computer after this step. If you're still seeing the error, revert this setting back to what it was and continue with the next suggestion below.

5. Reset BIOS back to factory default settings. Undoing every BIOS customization might reset something that was previously hiding the hard drive or corrupting how the operating system could be found.

   The easiest way to fix the “Operating System not found” error with a BIOS reset is to look for a reset option within the BIOS setup utility. It might be a function key like F9 that you need to press, or a menu option called Reset BIOS. The specific steps you need to take depend on the BIOS manufacturer.

   

6. Repair the boot records. Valid boot records are vital for a normal boot process. If the master boot record (MBR) or boot configuration data (BCD) store are corrupted or missing, you might see the “Operating System not found” error.

   Since you can't access Windows due to the error, you'll need to use an installation disc or flash drive to get to the repair tools talked about in this step and the next one. Learn how to do that in Windows 11/10/8 here; Windows 7 (here) and Vista users (here) can follow similar steps.

   

   See Also

   The Evolution of Microsoft Windows: From Windows 1.0 to 11 and Beyond - OS Weekly

   Start by rebuilding the BCD with this command (open that link for all the steps you need to get to the Command Prompt where you can type this):

    bootrec.exe/rebuildbcd

   While you're still in Command Prompt, after the previous command finishes, enter this one:
   

    bootrec.exe/fixmbr

   Finally, reboot your computer to see if the “Operating System not found” error has been fixed.

   See how to repair the MBR in Windows XP if you're using that version of Windows. Another way to fix some Windows XP boot files is by repairing the boot.ini file.

7. Use the diskpart command to activate the partition that Windows is installed on. For whatever reason, it could have become disabled, which would explain why you're seeing the “Operating System not found” error.

   

   Access Command Prompt from the installation CD by following the same steps as above, and then enter this command:

    diskpart

   Followed by:

    listdisk

   Use this command to pick the disk that corresponds to the one the operating system is installed on (most people will see just one in the list):
   

    selectdisk0

   Enter this to list all the partitions on that disk:
   

    listvolume

   Use this command to pick the partition on that disk that Windows is installed on:
   

    selectvolume2

   Make the volume active with this command:
   

    active

   If you've fixed the “Operating System not found” error, Windows should start normally when you reboot. Exit Command Prompt and choose Continue to try starting the operating system.

8. Reseat the hard drive's power and data cables. Unplugged or loose cables could be the cause of the error.

9. Reinstall the Windows operating system. The “Operating System not found” error might be literal. It's possible that malware or an unintentional format has wiped the OS from the hard drive.

   If you can't access the hard drive to reinstall the operating system, Step 10 is your last option.

10. At this point, a faulty hard drive is the only remaining reason for why you're still getting the error. Replace the hard drive and install a fresh version of the operating system to fix the error.